12x20 Standard Run In post and beam portable horse barn and shelter

12x20 Standard Run In with floor and siding upgrades plus custom ramps

12x20 Standard Run In Interior Kick Plate

10x14 Standard Horse Run In Barn that has been painted brown

Our post and beam horse run in shed is the sturdiest barn you can buy

10x14 Standard Run In with pressure treated sill and kick plate

The Standard Run In is a portable horse barn that can be pulled around a pasture

1220 Standard Run In - Charcoal Gray Roof

Run-In Standard

Name: Run-In Standard
SKU: RIST
Availability: InStock

STARTING AT:

MSRP: $2,613.00

Our Price: $1,569.00

Special Offer

This Run In includes all of the bells and whistles for a livestock shelter. A kickplate conserves the siding, steel corner brackets and pressure treated sill plate allow the building to be pulled around a pasture and battens provide additional protection from wind and rain.

Get The Plans

Configure Now

Description

The Standard Run-In Shed is a pasture favorite. Picture this attractive run-in shed out in your green rolling pasture. Now sit back and realize the practicality of this particular model. With a solid kick plate around the whole interior, this is a sturdy enough building for all your livestock needs. These small run-in sheds for sale were designed to be dragged from pasture to pasture when you rotate your fields. You may even opt to section off part of this shed and make it a tack room, complete with a wood floor. Locate the shed on a site with good drainage so the horses do not stand in muck and dirty water. Avoid placing the shed in a low spot or at the bottom of a hill where water can accumulate. Place the small run-in shed so the open side is opposite the direction from prevailing winds, to provide shelter against cold arctic winds. Situate the DIY horse run in shed out in the open, not under large trees that could be toppled by winds or ice. Consider approaching the shed with a vehicle; place it in an easy and convenient location so feed, a farrier or a veterinarian may access the site. Footing inside the shed should be dry and cleanable. We recommend the building sit on a level compacted crushed stone inches deep. Once the run-in shed kit is in place, lay rubber matting on top of the stone and add a bed of wood shavings, straw, or saw dust. It is solid and sturdy with 36″ full wrap around kick plate and heavy steel corner brackets are some of the features that distinguish this model from the basic version.

Whether raising chickens and rabbits or cows and horses, protection from the elements is essential for keeping animals healthy and productive. If you raise large livestock animals that are sensitive to rain, wind and hot sun, setting up a sturdy barn is one of the best investments you can make in your animals’ health. Some may require stall barn shelter for nightly quarters as well as day shelter such as a portable prefab loafing shed. If you keep horses or other animals that like to roam, consider a run-in shed. These provide the same reliable protection from wind and rain but allow more freedom. Our run-in-sheds, designed as portable structures, allow for rotation of fields by dragging the building to a new location.

From the smallest chicken coops to the largest stall barns, our buildings are made from rot-resistant Vermont Hemlock and Pine providing sufficiently warm, dry, and well-ventilated conditions to fit your livestock needs. Their simple interiors are easy to clean, helping to protect your animals from disease and parasites. They’re also structurally sound enough to keep out large or crafty predators such as foxes and raccoons.

Offered as frame only kits, complete pre-cut kits or step-by-step plans nationwide, our outdoor post and beam livestock solutions reflect the quality craftsmanship and traditional aesthetic of colonial New England. If you live in our Northeast delivery area, consider purchasing fully assembled and delivered to your prepared site. The natural wood tones of Vermont pine and hemlock are attractive by themselves, but the buildings are easily painted to harmonize with your home. Black hinges, latches, and other hardware add a touch of rustic elegance. Browse our livestock kits, plans, and prefab models today to get started.

See Our Reviews Materials List

Specifications

Select alternate Sizes and Types to View Specifications

Select Size:
8x10
8x12
8x14
8x16
8x20
10x10
10x12
10x14
10x16
10x18
10x20
12x12
12x14
12x16
12x18
12x20

8×10 Standard Run In

Complete Pre-Cut Kit (Pre-Set Options)

Base Area: 80 sq. ft.

Total Interior Area: 80 sq. ft.

Recommended Foundation: 4–6” Crushed Gravel

Overall Dimensions: 10’6” H x 10’6” W x 9’8” D

Estimated Weight: 3,200 lbs

SILL PLATES

6×6 Treated Sill Plate

WALLS

4”x4” Hemlock Post and Beam Wall Framing

Wall Height: Front: 94” Rear: 82”

Siding: 1” rough sawn Pine Board & Batten

1” rough sawn Pine Corner & Door Trim & 2” rough sawn Pine Fascia & Shadow Trim

ROOF

Saltbox Roof Style

Roof Pitch: Front: 12/12 Rear: 6/12

2”x6” rough sawn Hemlock Rafters 24” On Center

1”x6” rough sawn Hemlock Exposed Collar Ties

1”x4” rough sawn Hemlock Strapping 20” On Center

Corrugated 29g Metal Roofing, Color: Evergreen

6″ Front & Gable & 14″ Rear Overhangs

ROUGH OPENING:

1 (qty) 64”W x 76”H

Additional Features

Heavy Duty Steel Corner Brackets

Solid Hemlock 36” Kick Plate around Interior

Estimated Assembly Time & Logistic Information

Estimated Assembly Time: Two People: 18 hrs

Estimated Shipping Cube Sizes

Cube 1: 42”x42”x120”

Available Versions

Run-In Standard

8×10 Standard Run In

Complete Pre-Cut Kit (Pre-Set Options)

SILL PLATES

WALLS

ROOF

ROUGH OPENING:

Additional Features

Estimated Assembly Time & Logistic Information

Frame Only Pre-Cut Kit

Complete Pre-Cut Kit

Fully Assembled

8×12 Standard Run In

Complete Pre-Cut Kit (Pre-Set Options)

SILL PLATES

WALLS

ROOF

ROUGH OPENING:

Additional Features

Estimated Assembly Time & Logistic Information

Frame Only Pre-Cut Kit

Complete Pre-Cut Kit

Fully Assembled

8×14 Standard Run In

Complete Pre-Cut Kit (Pre-Set Options)

SILL PLATES

WALLS

ROOF

ROUGH OPENING:

Additional Features

Estimated Assembly Time & Logistic Information

Frame Only Pre-Cut Kit

Complete Pre-Cut Kit

Fully Assembled

8×16 Standard Run In

Complete Pre-Cut Kit (Pre-Set Options)

SILL PLATES

WALLS

ROOF

ROUGH OPENING:

Additional Features

Estimated Assembly Time & Logistic Information

Frame Only Pre-Cut Kit

Complete Pre-Cut Kit

Fully Assembled

8×20 Standard Run In

Complete Pre-Cut Kit (Pre-Set Options)

SILL PLATES

WALLS

ROOF

ROUGH OPENINGS:

Additional Features

Estimated Assembly Time & Logistic Information

Frame Only Pre-Cut Kit

Complete Pre-Cut Kit

Fully Assembled

10×10 Standard Run In

Complete Pre-Cut Kit (Pre-Set Options)

SILL PLATES

WALLS

ROOF

ROUGH OPENING:

Additional Features

Estimated Assembly Time & Logistic Information

Frame Only Pre-Cut Kit

Complete Pre-Cut Kit

Fully Assembled

10×12 Standard Run In

Complete Pre-Cut Kit (Pre-Set Options)

SILL PLATES

WALLS

ROOF

ROUGH OPENING:

Additional Features

Estimated Assembly Time & Logistic Information

Frame Only Pre-Cut Kit

Complete Pre-Cut Kit

Fully Assembled

10×14 Standard Run In

Complete Pre-Cut Kit (Pre-Set Options)